A voltammetry method was developed for the direct quantitative determination of clozapine in tablet dosage forms based on its oxidation behavior. The electrochemical determination of clozapine was easily carried out on glassy carbon electrode (GCE) using a variety of voltammetry techniques. The electrochemical measurements were carried out on GCE in various buffer solutions in the pH range from 3.00 to 12.00 by cyclic voltammetry (CV) and differential pulse voltammetry (DPV) techniques. The dependence of pH on the anodic peak current and peak potential was investigated. Acetate buffer (pH 5.50) was selected for analytical purposes. The diffusion-controlled nature of the peak was established. A linear calibration curve for DPV analysis was constructed in the clozapine concentration range from 3x10-6 mol L-1 to 1x10-5 mol L-1. Limit of detection (LOD) and limit of quantification (LOQ) were obtained as 4.082x10-7 mol L-1 and 1.361x10-6 mol L-1 respectively. Validation of applied voltammetric techniques was checked with recovery studies.
When the article is accepted for publication in the HSQ authors transfer all copyright in the article to the Holistence Academy Ar-Ge Yazılım Yayıncılık Eğitim Danışmanlık ve Organizasyon Ticaret Ltd. Şti.The authors reserve all proprietary right other than copyright, such as patent rights.
Everyone who is listed as an author in this article should have made a substantial, direct, intellectual contribution to the work and should take public responsibility for it.
This paper contains works that have not previously published or not under consideration for publication in other journals.