EUROPEAN TEMPUS TATU PROJECT AND WIRESHARK SOFTWARE IN INDUSTRIAL NETWORKS DATA TRANSFER PROTOCOLS STUDYING AND ANALYZING


Abstract views: 227 / PDF downloads: 321

Authors

  • Vladlen SHAPO National University "Odessa Maritime Academy"

DOI:

https://doi.org/10.26900/jsp.2018342247

Keywords:

European Tempus TATU Project, Wireshark network analyzer, industrial networks data transfer protocols, industrial networks data transfer protocols studying and analyzing

Abstract

Industrial data transfer technologies are implementing in industry, transport, energetic together with Industry 4.0 and IIoT concepts. Compatible with previous generations TCP/IP based protocols ProfiNet, ModBus/TCP, Ethernet/IP, EtherCAT were created to perform complex technical systems remote control.

In 2013 – 2017 European TEMPUS TATU (Trainings in Automation Technologies for Ukraine) project was realized and TATU Smart Lab (TSL) equipment was obtained.

TSL is a set of devices for modern automation technologies studying. It matches to Industry 4.0 and IIoT concepts. It contains programmable logic controllers, I/O devices, switches, wireless access points and can be used for studying of Ethernet based data transfer technologies, wireless data transfer, TCP/IP technologies, hard real-time systems, EtherCAT, CAN, RS232/485, PROFINET, Modbus TCP interfaces.

Wireshark software allows to analyze network traffic and supports capturing of long network protocols list. It helps to understand the reason of network problems, simplifies industrial and corporate networks exploitation.

Downloads

Download data is not yet available.

References

Architecture for Control Networks [Electronic resource]: https://acn.codeplex.com [Date Ac-cessed: 2 December 2017].
Distributed network protocol [Electronic resource]: https://www.dnp.org/AboutUs/DNP3%20Primer%20Rev%20A.pdf [Date Accessed: 2 December 2017].
European Tempus TATU project [Electronic resource]: https://tatu.org.ua [Date Accessed: 2 March 2018].
Gorb, S.I., Nikolskyi, V.V., Shapo, V.F., Khniunin, S.H., 2017, Programming controllers in the integrated development environment: training manual. Practice, Odessa: National University "Odessa Maritime Academy", 978-966-7591-73-1.
Gorb, S.I., Nikolskyi, V.V., Shapo, V.F., Khniunin, S.H., 2017, TATU study book. Trainings in Automation Technology for Ukraine, Villach: Carinthia University of Applied Sci-ences, 978-3-9504443-0-8.
Instrumentation tools [Electronic resource]: http://instrumen¬tationtools.com/what-is-hart-ip/#.WibYR3lx1aQ [Date Accessed: 2 December 2017].
Shapo, Vladlen, 2017, Programmable Logic Controllers Applying for Multi Segment Industri-al Data Transfer Networks Developing [online]: http://medcraveonline.com/IRATJ/IRATJ-03-00060.php [Date Accessed: 2 December 2017].
SixXS – IPv6 Deployment & Tunnel Broker [Electronic resource]: https://www.sixxs.net/tools/ayiya/ [Date Accessed: 2 December 2017].
The future of industrial automation [Electronic resource]: https://www.odva.org/Technology-Standards/Common-Industrial-Protocol-CIP [Date Accessed: 2 December 2017].

Downloads

Published

2018-07-31

How to Cite

SHAPO, V. (2018). EUROPEAN TEMPUS TATU PROJECT AND WIRESHARK SOFTWARE IN INDUSTRIAL NETWORKS DATA TRANSFER PROTOCOLS STUDYING AND ANALYZING. HEALTH SCIENCES QUARTERLY, 2(3), 89–96. https://doi.org/10.26900/jsp.2018342247

Issue

Vol. 2 No. 3 (2018)

Section

Letter to the Editor

License

When the  article is accepted for publication in the HSQ authors transfer all copyright in the article to the Holistence Academy Ar-Ge Yazılım Yayıncılık Eğitim Danışmanlık ve Organizasyon Ticaret Ltd. Şti.The authors reserve all proprietary right other than copyright, such as patent rights. 

Everyone who is listed as an author in this article should have made a substantial, direct, intellectual contribution to the work and should take public responsibility for it.

This paper contains works that have not previously published or not under consideration for publication in other journals.